Tacwise 0404 Type DA 15G / 38 mm Galvanised Angled Finish Nails, D Head, Pack of 4000, Silver

Product Information

When clearing a nail jam, make sure you disconnect your finish nailer from the air compressor or remove the battery to avoid potential injury. In most cases, the 16 gauge does a better job than the much thinner 18 gauge. Also, the 16 gauge delivers smoother and cleaner work than the 18 gauge nail gun. A closer look at how 15 Gauge Nails come in as a handy companion to your toolbox. Got a Pin Gun? Holding Power: gauge nailers shoot nails that are a little thinner than the 15 gauge and have a smaller head. Depending on the brand, these shoot nails from 3/4″ to 2-1/2″ inches long. They have good holding power and are a good general use gun. As I had said before, 15 gauge nails are, in general, multipurpose and work fine even when used for things that require good holding power.

gauge nailers are shooting nails slightly thinner as compared to that of the 15-gauge and has smaller heads. Depending on the brand, 16-gauge nailers are shooting nails that are from 3/4” to 2-1/2” inches long. And they also provide good holding power and make great general-use guns.Gauge Brads (Finish Nails) As aforementioned these fasteners are larger again than brad nails. The popular 16 Gauge Brad is 1.6mm in diameter. Sometimes these fasteners are referred to as a 2nd Fix Finish Nail. Finishing Nails - 15 Ga This tool can also be used for trim work. However, 23 gauge pin nailers are generally better for this work. How to choose the best 15 gauge nailer Nails aren’t the best way to secure PVC trim, but they can be used. Use a finishing nail gun with 15-gauge nails.

DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finishTrim and Molding Installation: Installing trim and molding requires precision nailing to ensure that all pieces fit together perfectly, and a 15 gauge finish nailer is up to the task. It can shoot nails depending on what type of trim or molding you’re installing, ensuring that everything is secured tightly and evenly. Overall, 15 ga nails you will find most commonly in the market are typically between 1-1/4” and 2-1/2” long. A: While a finish nailer can only accommodate up to 2 ½ inch nails, framing would require up to 3½ inch nails to join 2x4 boards together. A more suitable tool for this is a framing nailer. Q: Can a finish nailer use brad nails